Dukane 8912 Bedienungsanleitung PDF herunterladen (Seite 13)

Setting up

Connecting power supply

At rst, make sure that the power switch of the

projector is set to OFF position (marked "O").

Put the connector of the power cord into

the AC inlet of the projector.

Firmly plug the power cord’s plug into the

outlet.

WARNING ►Please use extra caution when connecting the power cord, as

incorrect or faulty connections may result in re and/or electrical shock.

• Only use the power cord that came with the projector. If it is damaged, contact

your dealer to newly get correct one.

• Only plug the power cord into an outlet rated for use with the power cord's

specied voltage range. The power outlet should be close to the projector and

easily accessible. Remove the power cord for complete separation.

• Never modify the power cord.

Using the security bar and slot

A commercial anti-theft chain or wire up to

10 mm in diameter can be attached to the

security bar on the projector.

Also this product has the security slot for the

Kensington lock.

For details, see the manual of the security

tool.

WARNING ►Do not use the security bar and slot to prevent the projector

from falling down, since it is not designed for it.

CAUTION ►Do not place anti-theft chain or wire near the exhaust vents. It

may become too hot.

NOTE • The security bar and slot is not comprehensive theft prevention

measures. It is intended to be used as supplemental theft prevention measure.

AC inlet

Power cord

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 87 88

Keine Kommentare

Dukane 8912 Bedienungsanleitung Seite 13