Dukane 8912 Bedienungsanleitung PDF herunterladen (Seite 54)

Please check and clean the air lter periodically. When the indicators or a

message prompts you to clean the air lter, comply with it as soon as possible.

Replace the air lter when it is damaged or too soiled. To prepare a new air lter,

contact your dealer and tell the air lter type number.

Type number : MU04951

When you replace the lamp, please replace the air lter. An air lter of specied

type will come together with a replacement lamp for this projector.

Cleaning the air lter

Turn the projector off, and unplug the power cord.

Allow the projector to sufciently cool down.

Use a vacuum cleaner on and around the lter

cover.

Pull the lter cover knobs while lifting it. The lter

unit which consists of the lter’ cover, air lter and

lter frame will come off.

Use a vacuum cleaner for the lter vent of the

projector and the lter frame side of the lter unit.

If the air lter is damaged or too soiled, replace it

according to the following procedure number 5 to 7.

Otherwise, please jump to the procedure number 8.

Pull the lter frame’ knob up while holding the lter

cover. The lter frame will come off and the air

lter will appear.

Replace the air lter with new one.

Put the lter frame back.

Put the lter unit back into the projector.

Turn the projector on and reset the lter time using

the FILTER TIME item in the EASY MENU.

(1) Press the MENU button to display a menu.

(2)

Point at the “FILTER TIME” using the ▼/▲ button, then press the ► button. A dialog will appear.

(3) Press the ▲ button to select “RESET” on the dialog. It performs resetting the lter time.

Maintenance

Air lter

NOTE • Please reset the lter time only when you have cleaned or

replaced the air lter, for a suitable indication about the air lter.

• The projector may display the message such as “CHECK THE AIR FLOW”

or turn off the projector, to prevent the internal heat level rising.

WARNING ►Before taking care of the air lter, make sure the power cable

is not plugged in, then allow the projector to cool sufciently.

►

Use only the air lter of the specied type. Do not use the projector without the

air lter or the lter cover. It could result in a re or malfunction to the projector

►

Clean the air lter periodically. If the air lter becomes clogged by dust or the like,

internal temperatures rise and could cause a re, a burn or malfunction to the projector.

Filter cover

Filter cover knobs

Filter unit

Filter cover

Filter frame

Air lter

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare

Dukane 8912 Bedienungsanleitung Seite 54

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Dukane 8912